VacOil

10 CFM Oil Mist Eliminator NW25 Kit *Filter Cartridge Included

Two-Stage Vacuum Pump Exhaust Filter Kit For rotary vacuum pumps it is recommended to vent them outside the room or to an exhaust hood to prevent indoor air contamination. This two-stage vacuum pump...

125 CFM Oil Mist Eliminator NW40 Kit *Filter Cartridge Included

Includes Filter Cartridge & Clamp Assembly. High performance oil mist eliminators for preventing oil mist from escaping from the exhaust of oil-sealed rotary vane vacuum pumps. Available in...

25 CFM Oil Mist Eliminator NW25 Kit *Filter Cartridge Included

For rotary vacuum pumps it is recommended to vent them outside the room or to an exhaust hood to prevent indoor air contamination. This vacuum pump exhaust filter enables venting rotary vacuum...

4.5" Bracket, Mounting, Zinc Plated w/screws

Mount your 4.5" Clear Inlets traps to a secure surface with this Zinc Plated 'L' Shaped bracket. 4 screws are included with each bracket.

5 CFM Oil Mist Eliminator 1/2" NPT

High performance oil mist eliminators for preventing oil mist from escaping from the exhaust of oil-sealed rotary vane vacuum pumps. Available in vacuum flange sizes from NW 16 to NW 40 and in flow...

55 Gallon Bucket Faucet

Recommended for dispensing light oils, acids and cleaning solutions. Use with plastic and or steel drums. 

55 Gallon Drum Pump - Steel

9.5" Bracket, Mounting, White Coated Steel w/screws

Mount your 9.5" Clear Inlets traps to a secure surface with this White Coated Steel 'L' Shaped bracket. 4 screws are included with each bracket.

9.5" Clear Sump Molecular Sieve Element with 3/4" FNPT Connections

9.5" Sump, with Molecular Sieve Element. This element will reduce mechanical pump backstreaming and trap water vapor. 3/4" Female Pipe Thread Terminations. NW 25 or NW 40 connections are also...

9.5" Clear Sump with PolyPro 2 Micron Element with 3/4" FNPT Connections

9.5" Sump, with PolyPro 2 micron Element. Traps high volumes of solids and particulates as small as 2 microns. 3/4" Female Pipe Thread Terminations. NW 25 or NW 40 connections are also...

Gas Ballast Knob (W2V10, W2V20, W2V40, W2V80)

Replacement gas ballast knob for the LACO W2V10, W2V20, W2V40 and W2V80.

LGL250 Replacement Element - Oil Mist Eliminator 50 CFM

This replacement element for your oil mist eliminator is manufactured with a seamless housing and no welds to rust or vibrate apart. This element can be easily replaced with a screwdriver...